Filter foam by PPI
80 PPI
0.32 mm · Approximate cell pitch; not measured pore diameter
- Typical uses
- Filtration, air handling and fluid management — grade-specific review
- Indicative pressure drop
- Measured curves required; request application-specific data
- Available densities
- 30 (±3), 35 (±3), 40 (±3), 45 (±5), 26 (±2) kg/m³
Datasheets
Manufacturer specifications · FR.46 · Revision 03 · 21.08.2026
Manufacturer limits and tolerances from FR.46; not illustrative values or a batch certificate. “Not specified” means the source provides no measurement. PPI nominal values and TA.82 ranges are shown separately.
Open original PDF ↓| Grade | Chemistry | PPI | TA.82 PPI range | Density kg/m³ (ISO 845) | ILD 40% hardness N (ISO 2439) | Tensile kPa (ISO 1798) | Elongation % | Tear strength N/cm (ASTM D3574) | CLD 40% hardness kPa (ISO 3386) | Air permeability dm³/s (ISO 7231) | FR option | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D 30 P.ESTER GK U60 80 PPI | Polyester | 80 | 72-88 | 30 (±3) | 170 (±15%) | ≥ 140 | ≥ 180 | ≥ 5 | 2,0-5,0 | Not specified | Not specified | View |
| D 35 P.ESTER GK U65 80 PPI | Polyester | 80 | 72-88 | 35 (±3) | 200 (±15%) | ≥ 140 | ≥ 200 | ≥ 4.5 | Not specified | Not specified | Not specified | View |
| D 40 P.ESTER U65 80 PPI GK | Polyester | 80 | 72-88 | 40 (±3) | 200 (±15%) | ≥ 150 | ≥ 500 | ≥ 5 | 3,0-6,0 | Not specified | Not specified | View |
| D 45 P.ESTER U65 80 PPI GK | Polyester | 80 | 72-88 | 45 (±5) | 250 (±15%) | ≥ 120 | ≥ 160 | ≥ 4 | 4,0-8,0 | Not specified | Not specified | View |
| D 26 RET. U60 80 PPI | Polyether | 80 | 72-88 | 26 (±2) | 140 (±15%) | ≥ 120 | ≥ 120 | ≥ 4.5 | 2,5-5 | ≥ 1.5 dm³/s | Not specified | View |
| D 26 RET. U60 80 PPI SENBR | Polyether | 80 | 72-88 | 26 (±2) | 140 (±15%) | ≥ 120 | ≥ 120 | ≥ 4.5 | 2,5-5 | ≥ 1.5 dm³/s | SENBR | View |
| D 30 EST. RET. U60 80 PPI | Polyester | 80 | 72-88 | 30 (±3) | 140 (±15%) | ≥ 130 | ≥ 150 | ≥ 5 | 2,0-5,0 | ≥ 1,3 dm³/s | Not specified | View |
| D 35 EST. RET. U65 80 PPI | Polyester | 80 | 72-88 | 35 (±3) | 170 (±15%) | ≥ 150 | ≥ 150 | ≥ 4.5 | Not specified | ≥ 1,5 dm³/s | Not specified | View |
- Standards
- ISO 7231 · ISO 845
- Lead time
- Quoted per order
- MOQ
- Per project