Filter foam by PPI
60 PPI
0.42 mm · Approximate cell pitch; not measured pore diameter
- Typical uses
- Filtration, air handling and fluid management — grade-specific review
- Indicative pressure drop
- Measured curves required; request application-specific data
- Available densities
- 30 (±3), 22 (±2), 26 (±2), 45 (±5) kg/m³
Datasheets
Manufacturer specifications · FR.46 · Revision 03 · 21.08.2026
Manufacturer limits and tolerances from FR.46; not illustrative values or a batch certificate. “Not specified” means the source provides no measurement. PPI nominal values and TA.82 ranges are shown separately.
Open original PDF ↓| Grade | Chemistry | PPI | TA.82 PPI range | Density kg/m³ (ISO 845) | ILD 40% hardness N (ISO 2439) | Tensile kPa (ISO 1798) | Elongation % | Tear strength N/cm (ASTM D3574) | CLD 40% hardness kPa (ISO 3386) | Air permeability dm³/s (ISO 7231) | FR option | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D 30 P.ESTER GK U45 60 PPI | Polyester | 60 | 54-66 | 30 (±3) | 180 (±15%) | ≥ 120 | ≥ 150 | ≥ 5 | 2,0-5,0 | Not specified | Not specified | View |
| D 22 RET. U45 60 PPI | Polyether | 60 | 54-66 | 22 (±2) | 130 (±15%) | ≥ 110 | ≥ 140 | ≥ 5 | 2-4 | ≥ 3.0 dm³/s | Not specified | View |
| D 26 RET. U45 60 PPI | Polyether | 60 | 54-66 | 26 (±2) | 165 (±15%) | ≥ 120 | ≥ 120 | ≥ 4.5 | 3-5 | ≥ 3 dm³/s | Not specified | View |
| D 30 EST. RET. U45 60 PPI | Polyester | 60 | 54-66 | 30 (±3) | 150 (±15%) | ≥ 110 | ≥ 140 | ≥ 4.5 | 2,0-5,0 | ≥ 2,0 dm³/s | Not specified | View |
| D 45 EST. RET. 60 PPI | Polyester | 60 | 54-66 | 45 (±5) | 225 (±15%) | ≥ 120 | ≥ 150 | ≥ 4 | Not specified | ≥ 0,5 dm³/s | Not specified | View |
- Standards
- ISO 7231 · ISO 845
- Lead time
- Quoted per order
- MOQ
- Per project