Filter foam by PPI
45 PPI
0.56 mm · Approximate cell pitch; not measured pore diameter
- Typical uses
- Filtration, air handling and fluid management — grade-specific review
- Indicative pressure drop
- Measured curves required; request application-specific data
- Available densities
- 22 (±2), 30 (±3) kg/m³
Datasheets
Manufacturer specifications · FR.46 · Revision 03 · 21.08.2026
Manufacturer limits and tolerances from FR.46; not illustrative values or a batch certificate. “Not specified” means the source provides no measurement. PPI nominal values and TA.82 ranges are shown separately.
Open original PDF ↓| Grade | Chemistry | PPI | TA.82 PPI range | Density kg/m³ (ISO 845) | ILD 40% hardness N (ISO 2439) | Tensile kPa (ISO 1798) | Elongation % | Tear strength N/cm (ASTM D3574) | CLD 40% hardness kPa (ISO 3386) | Air permeability dm³/s (ISO 7231) | FR option | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D22 U30 45 PPI G.K. | Polyether | 45 | 41-49 | 22 (±2) | 150 (±15%) | ≥ 80 | ≥ 80 | ≥ 3.5 | 2,5-4,5 | Not specified | Not specified | View |
| D 30 P.ESTER GK U30 45 PPI | Polyester | 45 | 41-49 | 30 (±3) | 210 (±15%) | 110 | ≥ 120 | ≥ 5 | 2,0-4,0 | Not specified | Not specified | View |
| D 22 RET. U30 45 PPI | Polyether | 45 | 41-49 | 22 (±2) | 130 (±15%) | ≥ 100 | ≥ 120 | ≥ 5 | 2-4 | ≥ 3.5 dm³/s | Not specified | View |
| D 30 EST. RET. U30 45 PPI | Polyester | 45 | 41-49 | 30 (±3) | 170 (±15%) | ≥ 130 | ≥ 180 | ≥ 4.5 | 3,0-6,0 | ≥ 3.5 dm³/s | Not specified | View |
- Standards
- ISO 7231 · ISO 845
- Lead time
- Quoted per order
- MOQ
- Per project