Filter foam by PPI
100 PPI
0.25 mm · Approximate cell pitch; not measured pore diameter
- Typical uses
- Filtration, air handling and fluid management — grade-specific review
- Indicative pressure drop
- Measured curves required; request application-specific data
- Available densities
- 45 (±5) kg/m³
Datasheets
Manufacturer specifications · FR.46 · Revision 03 · 21.08.2026
Manufacturer limits and tolerances from FR.46; not illustrative values or a batch certificate. “Not specified” means the source provides no measurement. PPI nominal values and TA.82 ranges are shown separately.
Open original PDF ↓| Grade | Chemistry | PPI | TA.82 PPI range | Density kg/m³ (ISO 845) | ILD 40% hardness N (ISO 2439) | Tensile kPa (ISO 1798) | Elongation % | Tear strength N/cm (ASTM D3574) | CLD 40% hardness kPa (ISO 3386) | Air permeability dm³/s (ISO 7231) | FR option | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D 45 P.ESTER U80 100 PPI GK | Polyester | 100 | 90-110 | 45 (±5) | 250 (±15%) | ≥ 120 | ≥ 160 | ≥ 4 | 4,0-8,0 | Not specified | Not specified | View |
| D 45 EST. RET. U80 100 PPI | Polyester | 100 | 90-110 | 45 (±5) | 210 (±15%) | ≥ 120 | ≥ 150 | ≥ 4 | 3,0-6,0 | ≥ 0,5 dm³/s | Not specified | View |
- Standards
- ISO 7231 · ISO 845
- Lead time
- Quoted per order
- MOQ
- Per project